Midi control over Counter patch

Lightpainter's picture

Hi!

I'm trying to control pixel accumulator values via midi-controller (Akai MPK Mini or Novation Nocturn). I'm using "Counter" for increasing and decreasing the signal, at the moment it can only be done by using Mac keyboard's arrow buttons (left - and right +). Does anyone know how to map those commands to Midi-controllers faders or rotation knobs? I hope someone understands my question :) Thanks in advance!

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

zackon1's picture
Re: Midi control over Counter patch

hi try the MIDI Controllers Receiver to a Interpolation right click on the Interpolation and change the time base to external

Lightpainter's picture
Re: Midi control over Counter patch

Hi!

Thanks for the reply! Problem is that the "Interpolation" has only one output and the "Counter" has two inputs ("Increasing signal" and "decreasing signal". How shall I connect it? There's a pic attached, but without the MIDI reciever and Interpolation. I just want to replace the "Keyboard" with MIDI-reciever or similar, just to get an external MIDI-device with fader or knobs control the "Counter".

-HH-

PreviewAttachmentSize
Screen capture part of the composition.jpg
Screen capture part of the composition.jpg63.54 KB

jersmi's picture
Re: Midi control over Counter patch

You could use a Queue to test if your midi value is incrementing or decrementing, then set up something to pulse the counter.

PreviewAttachmentSize
Screen Shot 2012-10-31 at 11.24.25 PM.png
Screen Shot 2012-10-31 at 11.24.25 PM.png95.67 KB