Audio Reactive line between 2 points

digitalgigalow's picture

I am interested in trying to draw from point a to point b. i would like to know how to place a start point and end point while keeping it in view. my ultimate goal is to control the lines with faders. straight line drawn from point a to point b.

i have attached 2 files. one is a 3D .dae file, the other is a .qtz. the .qtz file is set the way i like it. the .dae file might be needed for the patch. what i am looking for is lines between the boxes and for them to start from the outside boxes to the inner boxes.

were i was having problems was with the PLACEMENT of the lines. i think i needed another patch in the mix.

also attached is something for anyone that has an ipad and Resolume 3

thanx for all your help and knowledge.

The Digital Gigalow

PS. Zip file has all 4 files

PreviewAttachmentSize
Archive.zip146.66 KB

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

dust's picture
Re: Audio Reactive line between 2 points

the qc screen on x is negative one to one making that a screen width of 2. so yo need to keep your point.x in-between those values. so no smaller or larger than negative one to one. your height will vary depending on aspect ratio but if you use the same rule as you did for x with you should be ok.

dust's picture
Re: Audio Reactive line between 2 points

i just checked out this patch and there doesn't seem to be anything in your qc file besides a model. there is a touch osc gui builder file with a hefty osculator patch but nothing representative of what your talking about trying to do with qc. GT just posted a stock line drawing patch that might help show you how to draw line from a-b. maybe the file you intended on including is missing. the movie also doesn't work. your osculator file eludes me to believe there is much more going on that you have presented as far as data ?

digitalgigalow's picture
Re: Audio Reactive line between 2 points

This is the base of the project. what i am looking for is an audio reactive line going between the outside box to the inside box. example - electric bolt like power.

this is the starting point. all other elements are done. i just use the 3D object as a starting point. i have put some particle systems on it so far (only half of them) to give you an idea of where i am going. line in between boxes and particle systems.

sorry if i did not explain that well

PreviewAttachmentSize
GLOBE 4.qtz11.13 KB

digitalgigalow's picture
Re: Audio Reactive line between 2 points

the movie was a .dae that i changed to .mov to upload separately. it is the same file that is in the quartz file (cubes and torus's. i forgot to change it back.

the osc file i am giving to anyone that has an ipad and resolume. it is 3 pages. each page has 6 layers, with 15 clips per layer, 10 decks per page. that is 2700 clips that can be triggered. the rest of the file is effects. I wanted to give something in return for any help i get. it is a controller for resolume and most of its features.